Best for gates weighs upto 500kg
Galvanized Base Plate
9 Ft Galvanized Gear Racks
2 wireless remotes of 100-150 Feet Range and 1 wireless remote of 60 Feet Range
2 PIR Motion sensors for safety
This motor works on RACKS and PINIONS technology where the racks moves on gear.
To tackle the issue of a power failure, you can operate manual by key even in case of an electronic supply failure.
All the motors are with non reversible gearbox which helps in locking the gate. You don't need lock.
These motors are smart and it detects anything on its way, preventing any kind of physical damage to man or machine. Since the gearbox is oil based so the operation is completely silent.
It is secured by a thermal switch in case of overheating
Best for gates weighs upto 250kg (Individual Gate)
DC Motor with 3500 RPM
Hooter Light
2 wireless remotes of 100-150 Feet Range
Weather Resistant Body
The gate can be opened by any access control system(RFID, Biometric etc) as additional add ons
Best for gates with one leaf weighs upto 250kg and 2 leaf with total of 500kg
This motor can be paired with upto 50 remotes to operate.
It has DC Motor that avoid the case of overheating
Best for gates weighs upto 250kg (Individual leaf)
DC Motor with 100 RPM
Hooter Light for gate operation notification
2 wireless remotes of 100-150 Feet Range & 1 Rubber Gate Stop
Weather Resistant Body
The gate can be opened by any access control system(RFID, Biometric etc) as additional add ons
Open and close single or both the leafs by remote control.
This motor can be paired with upto 50 remotes to operate.
It has 12 volts DC Motor that avoid the case of overheating and in case of power failure with a new rechargeable back-up battery for 42 hours or 30-cycles.
Swing arms installed on the ground which eliminates the problem of water getting into motors